Dongguan CXM Technology Co.,Ltd
Home > News > Content
Product Categories
Contact Us
Add: China's Guangdong Province Dongguan Songshan Lake Industrial North Road No.6
E-mail: info@chexiaomi.net
Tel: +1 400-025-7787
Electric Scooter Is Caused By Improper Braking

Electric Scooter is caused by improper braking
Electric Scooter's brake is an important part of the Electric Scooter, although the car is not good will not affect the ride of the Electric Scooter, but there are a lot of security risks, we let the Shandong Electric Scooter manufacturers for us to find Out of the reason.
First; brake effect is good, but the cost of electricity. The reason is that the brake adjustment is too tight, the brake pads and brake pads have been in a slight braking state.
Second; poor braking effect, unsafe. Reason brake adjustment too loose, brake pads and brake pads in a slight brake state, that is, brake cars. So adjust the electric Scooter brakes are safe travel security.
When the Electric Scooter brake adjustment is not the main reason is due to the above reasons, if the brake is not properly adjusted, but also there are security risks, so be sure to adjust the brakes, as to how to adjust, we will explain for you later.
Electric Scooter has a lot of components, tires are a very important part of it, many people will be Electric Scooter wheel compared to "foot" tires metaphor for "shoes", select the good "shoes" for our "feet" Vital. So what do we need to pay attention to when choosing?
Electric Scooter needs to look at the tire logo, Electric Scooter tire identification parameters represent the safety of driving safety, comfort and energy efficiency economy, not only taking into account its price, tire material, climate, road conditions and other issues should also be together measure.
In the choice of tires, its wear resistance is an important consideration. Soft material tires can get greater traction, but its wear quickly; and hard material tire damage is slow, but its grip performance is poor; of course, different driving methods will make the tire produce different wear and tear.
Therefore, in order to ensure the normal operation of Electric Scooter, we need to replace the tire regularly, as in the choice of replacement tires, you can refer to the above mentioned content to select the appropriate tires.
Brakes are critical to the safety of the Electric Scooter, so be sure to check the brakes before using the Electric Scooter, so that you can not use the electric scooter's brakes properly when the brakes are not used properly.
1, check the brake handle of the trip, travel is too large, poor braking effect in an emergency brake brake, need to adjust the brake handle travel. Should brake the handle stroke is small, transferred to the normal range.
2, the brake line fixing screw. The brake wire fixing screw is used to fasten the brake wire and adjust the stroke of the brake handle. Adjust the brake wire to fix the screw when it should be released and should not be released. Such as all loose may cause the brake line from.
3, adjust the brake line fixing screw, with 10-12 wrench 10 to adjust the brake wire screw can pull the brake line on the line (the wrench should be rotated counterclockwise to release), let go of a circle to three laps The
4, pull the brake line, release the adjustment of the brake line screws, with the right hand holding the brake line to pull a little harder.
5, fastening the brake line fixing screw, with 10-12 wrench 10 fastening adjustment brake wire screws (wrench should be rotated clockwise for fastening), tighten, can not tighten the screws.
6, check the brake handle the stroke is qualified, should be left hand brake handle, right hand turn Electric Scooter rear wheel. Adjust the brake handle stroke within the normal range can be.
7, check the brake handle of the trip, the trip is too small, but the effect of good braking, but need to adjust the brake handle travel. Should be the brake handle stroke adjustable, transferred to the normal range.
8, the brake line fixing screw. The brake wire fixing screw is used to fasten the brake wire and adjust the stroke of the brake handle. Adjust the brake wire to fix the screw when it should be released and should not be released. Such as all loose may cause the brake line from.
9, adjust the brake line fixing screw, with 10-12 wrench on the 10th release to adjust the brake wire screws can pull the brake line on the line (the wrench should be rotated counterclockwise to release), let go of a circle to three laps The